2 1/2" Poly Blind

New 2 1/2" Poly Blind

2 1/2” Poly Blinds have a tighter blind closure and offers more privacy. The wider slat provides a clearer view to the outdoors and is perfect choice for larger windows.

Write a review

Note: HTML is not translated!
    Bad           Good

INSIDE MOUNT

                                                                  

 

A. Measure the width about 1 1⁄4” down from the top of the window, which typically is where the installation brackets will be mounted.

Remember to round down to the nearest 1⁄8”.

B. Measure the width at the center and bottom of the window. If the width narrows by more than 1” from the top measurement, the customer should consider an outside mount.

C. Measure the height of the window opening at

three locations, as shown at right, and order

the shortest measurement.

D. Measure window on the diagonal. If the two diagonal dimensions are not exactly the same, it may be more appropriate to specify an outside mount shade for optimal light control and privacy.

E. Measure depth of window for mounting brackets.

 

OUTSIDE MOUNT 

                    

 

A. Measure the desired width and height. To minimize light leakage, it is recommended that the blind overlap the window opening at least 1 1⁄2” on each side, as well as at the top and bottom.

B. Measure the width at the location where you want the blind, and use this measurement as

your ordering width for the shade.

C. Measure the height from where the top of the blind will be located to where you want the bottom of the shade. A flat vertical surface at

least 1 3/4” high is needed.

 

Coming Soon!

  • Views: 2823
  • Product Code: 2 1/2" Poly Blind
  • Availability: In Stock
  • $0.00
  • Ex Tax: $0.00

Available Options

Width: Height: