Solar Shade

New Solar Shade

These Solar roller shades (M Screen) with 5% openness are a popular window treatment to block sun rays while still having a view.

Write a review

Note: HTML is not translated!
    Bad           Good

INSIDE MOUNT

                      

 

A. Measure the width about 1 1⁄4” down from the top of the window, which typically is where the installation brackets will be mounted.

Remember to round down to the nearest 1⁄8”.

This measurement is the ordering width of the shade. Do not make any deductions from this width – all necessary deductions will be made automatically when the shade is fabricated.

B. Measure the width at the center and bottom of the window. If the width narrows by more than 1” from the top measurement, the customer should consider an outside mount.

C. Measure the height of the window opening at

three locations, as shown at right, and order

the shortest measurement. Again, make no deductions. All necessary deductions will be

made when the shade is fabricated.

D. Measure window on the diagonal. If the two diagonal dimensions are not exactly the same, it may be more appropriate to specify an outside mount shade for optimal light control and privacy.

E. Measure depth of window for mounting brackets.

 

OUTSIDE MOUNT

                                                                          

 

 

A. Measure the desired width and height. To minimize light leakage, it is recommended that the shade overlap the window opening at least 1 1⁄2” on each side, as well as at the top and bottom. As with inside mounts, do not make any deductions from your measurements.

B. Measure the width at the location where you want the shade, and use this measurement as

your ordering width for the shade.

C. Measure the height from where the top of the roller will be located to where you want the bottom of the shade.

Coming Soon!

  • Views: 3583
  • Product Code: Solar Shade
  • Availability: In Stock
  • $0.00
  • Ex Tax: $0.00

Available Options

Width: Height: